Boss GT100

[c1105y]

are the patches from my GT10 compatible with my GT100 ?
If not is there a way to convert them?
thanks

[Dspmike]

Hi,
I tried this yesterday, and in general yes you can add them to your gt 100.
I ve used the gfx tools to import them, but with some mid files, the' application crashed.... A bug maybe.

Regards

[kberghoffer]

same here..since the GT100 patches section is soo empty here...tried to load GT-10 patches into the GT-100 but the librarian tells me its not possible..
any other chance ?
or do I have to create/wait?

thx

[sloopdawg]

First download the floorboard - http://sourceforge.net/projects/fxfloorboard/ from there you will be able to use/convert all GT and GR Patches on your 100. The floorboard is the only way (maybe not the only) but the best way. You won't be sorry.

[BILLY B]

I have had no luck with the librarian thingy...it says that i need midi connection
Please help me understand

Thanks

[mikko23]

hello! may be you can help me how to set may delay into dot 8 notes...thanks!

[Daxing]

hello! may be you can help me how to set may delay into dot 8 notes...thanks!

Hi,
You will probably know how to get to the FX chain, but I have listed step by step using the GT-100 screens and not the GT-100FxFloorboard software (great software BTW).

On the patch you want to create the dotted 8 notes do the following:
1. Goto the effect Press 'Effect' button
2. On FX chain screen (screen 1) using dial 4 - goto your delay in the FX chain (make sure this is switched on in your FX Chain using dial 3)
3. On screen 2, the delay screen use dial 6 and move the delay time dial around to the far right until you see the following BPM symbol (see attached)
Press write and off you go....

GT-100 Dotted 8 note

DSC02110.JPG (51.88 KiB) Viewed 43750 times

Note: Depending on the song, you should set the patch BPM to ensure the delay is in time with the song tempo; for example, if you are doing something like U2 where the streets have no name, set the patch BPM to 127bpm

To set the patch BPM do the following:
If you are still in the effect chain goto step 2 if not, start at step 1...
1. Goto the effect Press 'Effect' button
2. On FX chain screen (screen 1) using dial 4 scroll to the right until you are at the end of the FX Chain, you should see the following screen to set the patch master BPM.
3. press Write

GT-100 Patch Master Settings Screen

DSC02114.JPG (58.33 KiB) Viewed 43750 times

[JHD]

For all users or the GT 100 there are 25 classic patches written by the Boss team of guitarists at the Roland web site.? free download. I have done a few myself and will upload when i get the chance.